How to Use Markers and Edit Your Arrangement in Logic Pro - Loop Community Blog
Settle on a Feel knob position more toward Pull to realize a reasonably relaxed groove. Kyle now starts the bridge with a busy pattern on the toms, and then moves on to a bell sound on the ride. He uses restraint, hitting softly and behind the beat, with a slight crescendo toward the end. The quiet and laid-back yet complex drum groove brings a welcome pause to an otherwise high-energy drum performance, and builds up tension leading into the last two sections. That Chorus region was created when you populated the track with Drummer regions earlier in this lesson.
The drummer now plays the crash, and this last chorus is more consistent with the previous two choruses. The drummer plays a loud beat, heavy on the crash, which could work for an outro. You will, however, make him play double-time twice as fast to end the song in a big way. Playing double-time at that fast tempo makes the sixteenth notes on the kick drum sound ridiculously fast. The performance now sounds more realistic while retaining the driving effect of its double-time groove.
The drum fill at the end of the outro is now longer. However, raising the number of fills has the undesirable effect of adding a new fill in the middle of the outro. To remove that fill, you will cut the Outro region in two. You now have two two-bar Outro regions. The outro has the required power to drive the last four measures; however, it seems like the drummer stops abruptly before he can finish his fill. Usually drummers end a song by playing the last note on the first beat of a new bar, but here a crash cymbal is missing on the downbeat at bar You will resize the last Outro region in the work- space to accommodate that last drum hit.
A moment after you release the mouse button, the Drummer region updates, and you can see a kick and a crash on the downbeat at bar The drummer finishes his fill, punctuating it with the last hit at bar You are now done editing the drum performance and can focus on the sound of the drums.
Customizing the Drum Kit When recording a live drummer in a studio, the engineer often positions microphones on each drum. This allows control over the sound of each drum, so he can individually equalize or compress the sound of each kit piece. The producer may also want the drum- mer to try different kicks or snares, or to experiment with hitting the cymbals softer before he begins recording. In Logic, when using Drummer, the sounds of each drum are already recorded.
However, you can still use several tools to customize the drum kit and adjust the sound of each drum. You will study Smart Controls in more detail in Lesson 5. In this exercise, you will use Smart Controls to quickly adjust the levels and tones of dif- ferent drums.
The Smart Controls pane opens at the bottom of the main window, replacing the Drummer Editor. It is divided into three sections: Mix, Compression, and Effects. In the Mix section, six knobs allow you to balance the levels of the drum. To the right of each knob, a button lets you mute the corresponding drum or group of drums. On the left channel strip in the inspector, the Compressor plug-in is dimmed, indicat- ing that it is turned off.
As you drag up the knob, you will start hearing the subtle reverberation of a drum booth. In the inspector, you can see the Bus 1 Send knob move along with the Tone knob.
It allows you to customize the drum kit by choosing from a collection of drums and cymbals and tuning and dampening them. You can also drag Drummer regions to another software instrument track, and they are automatically converted to MIDI regions. You can hear the snare sample. The snare stays lit while the rest of the drum kit is in shadow.
To the left, a Snares panel contains your choice of three snare drums, and to the right, an Edit panel includes three setting knobs. The left panel shows only a limited selection of snares. To gain access to the entire collection of drum samples included with Logic Pro X, you need to choose a Producer Kit in the Library.
To the left of the inspector, the Library opens, listing patches for the selected track. The current patch, East Bay, is selected. The Drum Kit Designer window is reset. Clicking the disclosure triangle displays the individual tracks and their channel strips. You will use Track Stacks in Lesson 5. This time the left pane displays a choice of 15 snare drums use your mouse to scroll down the list. The current snare, Black Brass, is selected.
Continue previewing different snares and try listening to a verse or a chorus to hear your customized drum kit in action. The info pop-up window updates to show you information on the selected kick drum. Listen to the kick drum. This kick is the right choice for your song, but it has a long resonance. Typically, the faster the tempo of the song, the less resonance you want on the kick; otherwise low frequencies build up and could become a problem during the mix.
You may have seen drummers stuff an old blanket in their kick drum to dampen them. In Drum Kit Designer, you only have to raise the dampening level. You will now tune the toms, which are mainly used in the bridge section.
You can hear only the low and mid toms. The Edit panel opens with four tabs: All for adjusting settings of all three toms in the kit together ; and Low, Mid, and High for adjusting settings of each individual tom. You can hear the mid tom being pitched up as Kyle continues repeating the first half of the bridge. If you want, feel free to continue exploring Drum Kit Designer and adjusting the sound of the hi-hat, ride, and crash cymbals.
You have exchanged the snare for another one that sounds a little clearer, dampened the kick drum to tame its resonance, and tuned the mid tom to pitch it a bit higher. You have now fully customized both the drum performance and the drum kit. To select all regions on a track, make sure Cycle mode is off, and click the track header. If Cycle mode is on, only the regions within the cycle area are selected.
At the bottom of the main window, the Piano Roll opens, showing the contents of the selected regions, ready to be edited. Individual drum hit are represented by note beams on a grid, making it easy to select, move, or delete any of them. You also customized the drum kit to get your desired sound. Lesson Review 1. How do you choose a drummer? How do you choose a new drummer while keeping the current drum kit? Where do you edit Drummer regions? How do you mute or unmute drum parts?
How do you make the drummer play softer or louder, simpler or more complex? How do you access the Feel knob to make the drummer play behind or ahead of the beat? How do you open Smart Controls? How do you open Drum Kit Designer? When customizing a drum kit, how can you access all the available drum kit pieces? How do you dampen or tune an individual drum? Answers 1. Click the drummer in the character card, or from the Genre pop-up menu, choose a genre, and then click the desired drummer.
Option-click the desired drummer. Automation gives sounds the movement it needs Read more…. Bus routing is very important in music production. It allows you to group tracks, change signal flows and overall gives you more control over your session.
The Apple Loops Library is a great addition to Logic that allows producers to easily drag and drop pre-made loops and One Shots into their sessions. These sounds are provided by Apple and are free Read more…. Categories: Tutorials. Leave a Reply. What's on your mind? Music Sing. Dj Music. Music Studio Room. Better Music. Music Writing. Learn how to master your songs using my simple 7 step mastering formula. Make your masters sound loud, fat, and full, just like your favorite commercial tracks.
Download my How to Master a Song Infographic that breaks down all the steps — it's free! Online Mba. Online School. Free Online. Music Recording Studio. Music Studio. Sound Studio. Studio Diy. Studio Gear. Studio Design. Why is limiting needed during mastering? What is the key to effective, tasteful limiting?
And how much is too much? Music Mix. All Music. Sound Of Music. Music Lessons. Guitar Lessons. Home Recording Studio Setup. Guitar Chord Chart. Music Tech. Recorder Music. Read tips and watch a video tutorial for mixing guitars with iZotope's Neutron 2 plug-in, an all-in-one dynamics processing tool.
In Logic Pro, Control-click the title Arrangement in the arrangement track header, then choose Suspend Content Connection from the shortcut menu that appears. Select an arrangement marker In the Logic Pro arrangement track, click the arrangement marker.
To select multiple arrangement markers, Shift-click them. Move an arrangement marker In Logic Pro, drag the arrangement marker to a new position in the arrangement track. Copy an arrangement marker In Logic Pro, Option-drag the arrangement marker to the position where you want to place the copy.